540/550 Series and 540/550 Series with Service Seal

Lightweight, finger-lug design, HYMAX all stainless steel clamps resist corrosive atmospheres and hot soils. Available in single-section Full Seal® style (540 Series), two-section Xtra Range® style (550 Series) and Servi-Seal® style with welded-in service outlet in both single and double section. Each clamp size can accommodate a wide range of O.D. variations.

      • Stainless steel bands are machine-welded
      • Standard lengths from 7-1/2″ to 30″ 
      • High strength stainless steel bolts have spin-fit threads treated with an anti-galling agent
      • Specially compounded rubber gasket has a gridded pattern for positive sealing. Tapered ends make installation quick and easy 
      • Stainless steel gap bridges, recessed and molded into the gasket where band sections join, add support to provide 360 degree clamping pressure 
      • Optional bonding device is available to maintain electrical continuity across clamp band 
      • Optional add-on feature allows clamps to be joined over a longer than normal pipe length
      • Sizes from 2″ to 12″ (3″ to 24″ 550 Series)
  • Maximum working pressure: 150 PSI for 540 Series; (300 PSI 550 Series 3”-8”, 150 PSI 10” & 12”)

NOTE: The HYMAX products on this page are identical to the MUELLER pipe repair products of the same names. See Mueller pipe repair catalog or Mueller website.

 

pdf installation instructions
pdf 540 Series submittal
pdf 550 Series submittal
pdf PS14482 HYMAX Repair Clamp 540_500 Spec Sheet
pdf Pipe Repair Brochure
540 Series
nominal pipe size: 2" - 12"
working pressure: 150 psig
torque 2"- 3.5: 30-40 ft.lbs.
4"-8": 50-80 ft. lbs.
10"-12": 65-75 ft.lbs.
7.5 x2 , 10"x3 , 12.5"x3
15"x4, 20"x5, 30"x7
550 Series
nominal pipe size: 3" - 24"
working pressure: 3"-8": 300 psig
10"-12": 150 psig
16" - 24": 75 psig
torque 2"- 3.5: 30-40 ft.lbs.
4"-8": 50-80 ft. lbs.
10"-12": 65-75 ft.lbs.
7.5"x4, 10"x6, 12.5"x3
15"x8, 20"x10, 30"x14
540 Series - Service Seal
nominal pipe size: 2" - 12"
working pressure: 150 psig
torque 2"- 3.5: 30-40 ft.lbs.
4"-8": 50-80 ft. lbs.
10"-12": 65-75 ft.lbs.
7.5 x2 , 10"x3 , 12.5"x3
15"x4, 20"x5, 30"x7
550 Series - Service Seal
nominal pipe size: 3" - 24"
working pressure: 3"-8": 300 psig
10"-12": 150 psig
16" - 24": 75 psig
torque 2"- 3.5": 30-40 ft.lbs.
4"-8": 50-80 ft. lbs.
10"-12": 65-75 ft.lbs.
7.5"x4, 10"x6, 12.5"x3
15"x8, 20"x10, 30"x14